clearance hole मीनिंग इन हिंदी

उदाहरण वाक्य

1. To accommodate the coax, one contact was replaced by a clearance hole.
2. Fasteners should only be torqued if they are fitted in clearance holes.
3. In addition to the pilot hole, drill a clearance hole for the screw shank.
4. The cylinder guard is a hardened steel plate with a clearance hole for the key.
5. These cut a clearance hole in soft materials ( such as wood of plastic ), but are destroyed by more robust materials ( such as metal ).
6. Another important feature is a larger clearance hole at the end of the cone allowing sections of the pencil lead which break away to be removed with only minor inconvenience.
7. For such large screws you may need a larger clearance hole where the screw goes through the first wood member, and then a smaller pilot hole in the second member.
8. Drill a clearance hole through the tread for the body of the screw, and a pilot hole into the riser below it to keep the wood from splitting when the screw goes in.
9. Drill the pilot hole first, then the shank hole; finally use a larger drill or countersink bit to drill the clearance hole for the head ( countersinking is only necessary for flat or oval headed screws ).
10. Counterbores matched to specific screw sizes generally have integral pilots that fit the clearance hole diameter associated with a particular screw size ( e . g ., . 191 inches for a number 10 machine screw ).